Utilizando o módulo adicional do RF-STEEL AISC, é possível dimensionar barras de aço segundo a norma AISC 360-16. The following article will compare the results between calculating lateral torsional buckling according to Chapter F and Eigenvalue Analysis.
Este artigo explica como determinar cargas com base nas situações de forças internas definidas na extensão RF-/STEEL Warping Torsion do módulo adicional RF-/STEEL EC3. Como o programa para além de analisar estruturas portantes completas de barras do tipo corrente também permite analisar partes extraídas, é necessário determinar as cargas da estrutura parcial de forma separada. Para tal, foi desenvolvida uma função de transformação especial que determina novas cargas para todas as estruturas parciais (dependendo dos esforços internos calculados no RFEM/RSTAB) de acordo com cada situação de carga para uma análise de torção com empenamento geometricamente não linear com sete graus de liberdade.
In the AISC 360 – 14th Ed. C2.2, the direct analysis method requires initial imperfections to be taken into consideration. The important imperfection of recognition is column out-of-plumbness. According to C2.2a, the direct modeling of imperfections is one method to account for the effect of initial imperfections. However, in many situations, the expected displacements may not be known or easily predicted.
Requirements for the design of structural stability are given in the AISC 360 – 14th Ed. Chapter C. In particular, the direct analysis method provisions, previously located in Appendix 7 of the AISC 360 – 13th Ed., are described in detail. This method is considered an alternative to the effective length method, which in turn eliminates the need for effective length (K) factors other than 1.0.